Please see this post:
http://lists.contesting.com/_writelog/2009-06/msg00081.html
It says:
"But for the IC-706 there are three models, each with its own hex code
as follows:
IC-706 48h
IC-706MKII 4Eh
IC-706MKIIG 58h
"
The radio address (programmed into your ICOM) should have been 58h, it
sounds like the radio was re-programmed. DX4WIN has only *ONE* hex
address code for the entire IC-706 line (48h), which sounds like it
could be improved.
73 - Jim AD1C
p.s. you can copy pskcore.dll from the 8.04 directory to the 7.06 directory
On Wed, Jul 21, 2010 at 11:59 AM, Andy Hewitt
<[email protected]> wrote:
> Thank you for your reply. Unfortunately for some reason I can't open
> ver7.06, it says it can't find the psk.dll, it's there OK in the DX4W
> directory but after I set up 8.04 it won't work.
>
> No problem anyhow.
>
> I opened the .INI file with notepad and there under radio are the settings,
> they may not get transferred but they are recorded. In the case of the
> IC706mk2g the baud rate should be 4800 (not 1200 as DX4W wants) and the
> address 4E (not 48 as the default in DX4 is, nor 50 as the notes for the
> radio in Preferences says). DTR and RTS are low and it's all working now.
--
Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
