Hi Mel Thanks for your ideas... this type of CT-17 substitute is in use http://www.iw7ehc.altervista.org/CI-VinterfacciaEN.htm Need to try with another one.
BR Olli OH6CT > -----Alkuperäinen viesti----- > Lähettäjä: Mel [mailto:[email protected]] > Lähetetty: 16. syyskuuta 2011 3:13 > Vastaanottaja: Olli Tuppurainen > Kopio: REFLECTOR dx4win; [email protected] > Aihe: Re: [Dx4win] Hints for IC-781 ? > > Some of the older Icoms won't work with the cheap CT-17 substitutes that > are not using RS232 levels. If it's a CT-17 or anything using a MAX232 chip it > should work fine. I used 9600 baud, 1 stop bit and a 1000ms polling rate with 4 > retries for years. Don't try polling too fast, the older rigs can't keep up. > > How are you interfacing the 781 with your computer? > > On 2011-09-14 15:18, Olli Tuppurainen wrote: > > A friend of mine just bought dx4win and he has IC-781 with RS-232 > > connection to PC. (PC with "genuing" RS-232 port) > > > > N1MM works perfectly with same PC and cable to radio but not DX4WIN. > > > > Baud rates and address ( 26 ) are OK. Should the RTS and DTS be OFF > > or ON by default? > > > > With 300Bd it worked for a few moments but then nothing. > > > > Any ideas? > > > > > > Olli > > OH6CT > > > > > __________________________________________________________ > ____ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
