Here is my 2 cents worth on the same problem. I've been sitting on the sidelines, but have had the same problem since I started using DXBase several versions ago. It is rather difficult to explain details without being longwinded, but here goes. >From the dropdown menu: output, awards, DXCC; I check ALL modes & all bands desired, QSO log & cards only, exclude past submissions & combine RTTY & Digital. I believe that SHOULD give me my complete submission. I found no errors, but did have some QSLs that were not selected for submission. There were 3 RTTY QSO missing from the report (calls or prefixes don't matter). Using the summary window it was easy to verify that each was applied to the right prefix, confirmed, and none were already credited for DXCC.
After accepting that report (marking all QSOs credited) the same procedure produced no new QSOs to be credited. Starting over again; from the dropdown menu: output, awards, DXCC; I unchecked all bands and modes EXCEPT RTTY and this produces the QSOs that were originally omitted. I now have two reports to combine for one submission. Had I not keep good records (DXbase of course) and put the QSLs aside, I would not have even known they were omitted. It has been complained about before by others, but seems to have just been shrugged off as operator error. 73, Fred K1ACL ----- Original Message ----- From: "George Johnson" <[EMAIL PROTECTED]> To: "TOM" <[EMAIL PROTECTED]>; <[email protected]> Sent: Wednesday, May 25, 2005 8:02 PM Subject: Re: [Dxbase] dxcc worksheet? > Tom, > It's a little hard to tell from your notes exactly what is or is not being > included. Maybe a specific callsign example would help. > > I use the DXCC function here and it seems OK in 2006. > > For the case you mention as QSLs you know should be listed but are not, a > couple quick "reasons" come to mind: > 1. The country (log column labeled prefix) of these "QSLs" has already > been recognized by DXBase as being credited for DXCC. > 2. The actual QSO you want does not indicate that a QSL has been > received. > > There are several more possibilities as part of the selection logic etc > but it sounds like you may have already addressed those. > You can check item 1 above by running the report: Output / Standard > Reports . Look in User Designed other DXCC Related list for the report > dxcccredselect.rpt. If you run this report you will see everything DXBase > "thinks" has been credited. > Hope this helps but maybe a little more info from you could pin point the > direction too. > 73, George .. W1ZT > > > > At 07:17 PM 5/25/2005, TOM wrote: >>IS anyone out there experiencing problems with the DXCC Worksheet report >>for submission to ARRL as i am? i have spent about 3 weeks off and on >>trying to get this report correct for field checking and have had numerous >>problems getting it right? I havn't seen many posts on it except for >>multiple q's which i figured out, but my problem is it listing q's already >>credited and not listing ones that should be listed for submission? I have >>gotten it down 2 two qsls i need to submit and have listed on report but >>for some reason Dxbase 2006 will not recognize them not matter what i try >>checking or unchecking in the awards field or select field? any help would >>be appreciated here? one final note i have always done this by long hand >>method up to know so this may be part of my problem but don't have a clue >>how to correct it? TNX.....AA1BQ...TOM >>______________________________________________________________ >>Dxbase mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[email protected] > > >
