Hi Folks, OK, here is the story:
The firmware for the Winkey has contained an error since its first introduction a few years ago. No one at Winkey knew about it and it did not cause any problem until they revised their firmware beginning with their version 9. A few weeks ago, they made a change in their v10 firmware that eliminated the trouble, but for those who have the original v9 and v10 firmware before they made the most recent change, you will experience trouble making the interface with DXbase work and in most cases the interface would simply lock up. We have made a patch for DXbase v2006 that will eliminate the trouble for those who have the original firmware in their Winkey. This would solve the trouble without any need to obtain a firmware update in your Winkey. This is the easiest and preferred solution. If you need the patch, drop us a direct email and we will email the patch. We will be updating our web with the patch but it will take some time for us to accomplish that. For those who have an earlier version of DXbase and experiencing a problem with Winkey not working at all, you'll need to upgrade to DXbase 2006 and this would allow you to take advantage of the DXbase 2006 patch. Otherwise, you would need to refer your issue to the Winkey folks. Regards, Jack Scientific Solutions, Inc. ----- Original Message ----- From: "Greg Tomerlin - K4KO" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, August 12, 2005 10:58 AM Subject: Re: [Dxbase] DXBase 2006 + WinKey via micro KEYER > > Eric (and others): > > Let me know what you learn re: DXBase 2006 and WinKey v10. I recently > ordered (due any day now) one of Jozef's microKEYERs which comes with > WinKey v10. In addition to all the other features of the device, I'm > looking forward to using the computer to key CW. Of course, after > ordering the thing I discovered that the two logging programs I use, > DXBase and WriteLog, are not working so well with the device. I hope > these problems are temporary. > > > 72 Greg K4KO > > Antennas on Tennessee - September 11 - Tennessee QSO Party > http://www.k4ro.net/tcg/tqp/tqp05_rules.html > > > Eric <[EMAIL PROTECTED]> wrote: > > > On the microHAM reflector there is mention that DXBase may have a > > problem with the new version 10 of WinKey. > > > > If anyone, including the good folks at Scientific Solutions can > > shed light on this mystery please jump in. > > > > Eric - VE3GSI. > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
