I may have missed something here, but for what it's worth... I'm running DXBase 2006 and constantly start the software with my radio off and never see any error message. Under Tools/Options/Radio1 I have the Connect HF Radio 1 Serial Interface checked and under Tools/Options/LogDefaults I have Load Band/Mode from HF Transceiver checked. Both boxes remain checked the next time I start DXBase after using it with the radio off. If the radio is on and I start DXBase, the serial connection works ok. If I start DXBase with the radio off, then turn the radio on, the serial connection works. Under both conditions, I don't get any error message.
I have seen an error message under DXBase 2005 (I think) if I forget to turn the power on to my CT-17 level converter. That produced an error message and cleared the checked boxes. I cannot reproduce this action with DXB 2006. Gary AL9A ----- Original Message ----- From: "Larry - K2GN" <[EMAIL PROTECTED]> To: "Michael Hatzakis Jr MD" <[EMAIL PROTECTED]>; <[email protected]> Sent: January 15, 2007 9:39 AM Subject: Re: [Dxbase] Start Sequence > That's the option that DXbase turns off. Then I have to turn it on. > Thanks, but not a fix. > de K2GN > > > From: "Michael Hatzakis Jr MD" <[EMAIL PROTECTED]> > To: "'Larry - K2GN'" <[EMAIL PROTECTED]>; <[email protected]> > Sent: Monday, January 15, 2007 11:39 AM > Subject: RE: [Dxbase] Start Sequence > > >> Tools --> Options --> User Options --> Radio 1 --> Uncheck Turn On HF >> Radio >> Serial Interface. >> >> Same with CW. >> >> Michael >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
