Hi Peter As I am going thru the code I will look and see if I notice anything that would cause this.
73 Neal Campbell Abroham Neal Software www.dxbase.com www.abrohamnealsoftware.com www.sdrsystems.com (540) 242 0911 Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to [email protected] Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ DX Cluster: dxc.k3nc.com port 23 On Mon, Oct 5, 2009 at 1:15 AM, Peter Dougherty <[email protected]> wrote: > Hi all, > > This one's been vexing me for years now and I'm hoping it's not just a case > of user-error. > > Scenario: Options/Alerts: Global Category Filter set to "New Mode or New > Band," and RTTY and Digital lookups are merged. RTTY is checked for every > band I operate in the Individual Band/Mode Filter. I do not operate PSK or > any other digital mode, just pure FSK RTTY. > > In Band Plan Mapping, RTTY is set as the digital mode as appropriate > (14073-14149, 21073-21199 and others). > > A needed RTTY spot (new RTTY for an entity) comes on the cluster. If it has > nothing in the comments field it triggers normally. If "RTTY" is present > anywhere in the comments field of the incoming spot, DX Base ignores the > spot altogether and just passes the spot off as unneeded. This is > repeatable > on all 3 of my machines. I've missed far too many RTTY entities as a > result, > and would appreciate any suggestions on how to remedy this. > > Thanks in advance. > > ----------------------------------- > > Regards, > > Peter, > W2IRT > > > > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
