Leigh Sharpe wrote: >> what does ethtool -i eth13 say? > > > [EMAIL PROTECTED]:~$ sudo ethtool -i eth13 > driver: e1000 > version: 7.1.9-k4-NAPI > firmware-version: N/A > bus-info: 0000:08:0b.0 > [EMAIL PROTECTED]:~$ > > >> also, can you tell us if you see the Intel AMT bios pre-boot screen >> come up? > > No pre-boot screen. > > I'll have a go at the new driver and let you know.
oh, my mistake, you don't need e1000e for this device, because you're running an 82546 you can try e1000-7.6.15.5 from sourceforge, no configuration changes necessary, it will probably run both your 82546 and 82566. after that release we split the PCIe support into a new driver, e1000e, and the pci support stayed in e1000 Since I think you have an 82566 also, if you upgrade to e1000-8.X please see http://sourceforge.net/docman/display_doc.php?docid=125331&group_id=4230 2 as your 82566 hardware will be supported by e1000e and 82546 by e1000. Jesse ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
