Using 8.0.3.1-NAPI, I get the same results.

Some further observations: 
When ethtool reports that the port is down, the LED on the card is still
on, and the link partner is showing that the port is up.
I have tried it both with and without autoneg, at full duplex and at
half duplex. (I'm not using Gigabit, only 10M and 100M) No difference. 
It is more prevalent when I put more traffic through it. Occasionally I
get the TX_unit_Hang messages. (I thought this was fixed long ago?)


Any further diagnostics I can provide?

 

-----Original Message-----
From: Brandeburg, Jesse [mailto:[EMAIL PROTECTED] 
Sent: Thursday, 28 August 2008 4:22 AM
To: Leigh Sharpe
Cc: e1000-devel@lists.sourceforge.net
Subject: RE: [E1000-devel] Port showing link down at random times

Leigh Sharpe wrote:
>> what does ethtool -i eth13 say?
> 
> 
> [EMAIL PROTECTED]:~$ sudo ethtool -i eth13
> driver: e1000
> version: 7.1.9-k4-NAPI
> firmware-version: N/A
> bus-info: 0000:08:0b.0
> [EMAIL PROTECTED]:~$
> 
> 
>> also, can you tell us if you see the Intel AMT bios pre-boot screen
>> come up?
> 
> No pre-boot screen.
> 
> I'll have a go at the new driver and let you know.

oh, my mistake, you don't need e1000e for this device, because you're
running an 82546
you can try e1000-7.6.15.5 from sourceforge, no configuration changes
necessary, it will probably run both your 82546 and 82566.

after that release we split the PCIe support into a new driver, e1000e,
and the pci support stayed in e1000

Since I think you have an 82566 also, if you upgrade to e1000-8.X please
see
http://sourceforge.net/docman/display_doc.php?docid=125331&group_id=4230
2

as your 82566 hardware will be supported by e1000e and 82546 by e1000.

Jesse

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel

Reply via email to