The Intel 1502 device id is the 82579LM Gigabit Network Connection, which is supported by the e1000e driver. You can download the e1000e driver from sourceforge.net: https://sourceforge.net/projects/e1000/files/e1000e%20stable/
Latest version is 3.4.0.2 and should compile just fine on your kernel, you just need to make sure you have the Linux kernel source installed. The Broadcom device is your wireless adapter. > -----Original Message----- > From: Dan Zulaica [mailto:dan.zulaica...@gmail.com] > Sent: Wednesday, April 18, 2018 12:29 > To: Kirsher, Jeffrey T <jeffrey.t.kirs...@intel.com> > Cc: e1000-devel@lists.sourceforge.net > Subject: Re: [E1000-devel] e1000 driver compile > > Hi, > This is an older Dell latitude laptop. I see on Ethernet and one Network > controller line using lspci. > > 00:19.0 Ethernet controller: Intel Corporation Device 1502 (rev 04) > > 02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) > > I have tried 'modprobe e1000.ko' and also for e1000e.ko and no return > messages. > > 'ifconfig -a' only shows 'lo'. > > Thanks for the help, > Dan > > > On Wed, Apr 18, 2018 at 1:15 PM, Kirsher, Jeffrey T > <jeffrey.t.kirs...@intel.com> wrote: > >> -----Original Message----- > >> From: Dan Zulaica [mailto:dan.zulaica...@gmail.com] > >> Sent: Wednesday, April 18, 2018 10:24 > >> To: e1000-devel@lists.sourceforge.net > >> Subject: [E1000-devel] e1000 driver compile > >> > >> Hi, > >> > >> I have Kubuntu with kernel version 2.6.32-24-generic on a Dell > >> Latitude laptop that has Intel Pro/100 network adapter. E1000 is said > >> to be the driver that needs to be re-compiled, however I cannot > >> re-compile it. Trying an E100 compile says it is no longer supported after > OS 2.4. > > > > The in-kernel driver for e1000 will be the most up-to-date driver. The out- > of-tree (OOT) driver on sourceforge will be older than what is in that > particular kernel. Are you sure you need the e1000 driver? You might need > the e1000e driver, which is the follow on to e1000 and supports newer client > silicon. > > > > If you have the device id (it can be retrieved from 'lspci'), we can verify > which driver you should be using for your ethernet device on the Dell > laptop. > > > >> I found some needed linux header files from the kernel.org archives, > >> however it does not have any autoconf.h file. I found a 'version.h' > >> file for the Makefile check for it. I decided to remove the check for > >> these two files and try the make. There are now a lot of warnings and > >> a few error messages. > >> > >> I am wondering what I need to compile a new driver. The laptop has > >> not network connection. I even looked for a USB to ethernet driver. > >> > >> Thanks, > >> Dan Zulaica > >> > >> --------------------------------------------------------------------- > >> --------- Check out the vibrant tech community on one of the world's > >> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > >> _______________________________________________ > >> E1000-devel mailing list > >> E1000-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/e1000-devel > >> To learn more about Intel® Ethernet, visit > >> http://communities.intel.com/community/wired ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
