> you did unplug / replug during make uninstall ? > it's necessary to empty modem's memory and reload the firmware / > dsp_code with parameters (the "now famous" OPTNxx or CMV)
I used the rpm, therefore no make uninstall. Maybe eagleconfig should say that the modem has to be replugged. As a side note (but it may be normal) this is the first time I notice that this happens. > Try to comment the line with OPTN1 (put a # at the beginning of line in > /etc/eagle-usb/eagle-usb.conf) That maid it. > if this systematically happens with Free dégroupé, could be done by > eagleconfig ? (sed "s/^OPTN1=/#OPTN1=/g" ...) > yep .rpmsave > but that means that just after install (either with rpm or make install, > it only works for Free non dégroupé and same VPI/VCI/encapsulation : > past configuration (either with eagleconfig or graphical tools) is lost > at each install... In that case there should be a clear per file separation for things intended to be modified and things intended to be controlled by the package version. > > I also think that having /etc/eagle-usb/eagle-usb.conf owned by the rpm > > would be much better. > could you elaborate ? Currently /etc/eagle-usb/eagle-usb.conf isn't owned by eagle-usb, but should be. Pat
