I thought about that yesterday and was going to try it but didn't find the
correct information for the demo server. I found demo.echovnc.com:1328
I will give that a try.
On Jan 14, 2008 6:44 AM, Scott Best <[EMAIL PROTECTED]> wrote:
> Mark:
>
> I'm not sure that this will affect your results much, but the
> latest
> build of EchoVNC is version 2.32, which you can get here:
>
> http://www.echogent.com/download_echovnc.htm
>
> Also, do you see the same problem when connected to our
> demo echoServer? Please try "demo2.echovnc.com", with the
> password "demo2008". That will help isolate where the issue could
> be.
>
> cheers,
> Scott
>
> On Jan 13, 2008, at 11:28 PM, Mark Rhoades wrote:
>
> > The EchoServer is 1.61
> >
> > EchoVNC is 2.20 according to the Exe version stamp under windows.
> >
> > On Jan 13, 2008 9:08 PM, Scott Best <[EMAIL PROTECTED] > wrote:
> > Mark:
> >
> > Hello! Those are some surprising results. I expect the relayed
> > connection
> > to be a *little* slower, but not *broken* slower. Exactly what version
> > of EchoVNC,
> > echoServer, and Windows OS are you running?
> >
> > -Scott
> >
> > On Jan 11, 2008, at 7:54 AM, Mark Rhoades wrote:
> >
> > > Hello all,
> > >
> > > I am hope somebody can help me with this problem. I have tried all
> > > kinds of setting in EchoVNC to try and get this to work.
> > >
> > > I have a EchoServer setup on a linux box (hosted Virtual Private
> > > Server).
> > > The remote computers can connect to the EchoServer.
> > > I can can see them an initiate a connection.
> > > It asks for the password and then starts to show the remote screen.
> > > I get about 1/6th of the screen fairly quickly
> > > The rest of the screen either never shows up or takes a very long
> > > time to display (10 minutes or longer).
> > >
> > > All of the sites are on high speed broadband.
> > >
> > > I am on a 15meg x 2meg connection
> > > EchoServer is on a 1meg x 1meg connection
> > > Remote site is on a 512k x 512k connection
> > >
> > > I have been able to connect point to point eliminating the
> > > EchoServer and everything works well.
> > > Once the EchoServer is in place there is extreme slowness.
> > >
> > > Any ideas on how to solve this?
> > >
> > > Thanks,
> > > Mark
> >
>
>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Echovnc-users mailing list
Echovnc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/echovnc-users
