Interesting. Exactly which proxy application; Squid, or something else?-Scott On Jan 16, 2008, at 6:17 AM, Mark Rhoades wrote: > The Proxy is the same Linux machine that the EchoServer is running on. > > So it would be EchoVNC Viewer -> Proxy/echoServer -> EchoVNC Server > > There is one thing I should note. The echoServer is running on port > 21. This is because one of the networks I plan to connect from > blocks most of the outgoing ports. > > Mark > > On Jan 15, 2008 8:45 PM, Scott Best <[EMAIL PROTECTED]> wrote: > Mark: > > Hello! Sorry, I'm not sure I see where in between the EchoVNC > application and the echoServer you inserted a new Proxy connection... > > Is it: > > EchoVNC Viewer -> Proxy -> echoServer <- EchoVNC Server > > Or ... ? > > thanks, > Scott > > On Jan 15, 2008, at 5:46 PM, Mark Rhoades wrote: > > > I have found an interesting solution to the slowness problem. > > > > I created a SSH tunnel to my Linux box. Setup EchoVNC Viewer to use > > the proxy connection. > > Then it connected to the EchoServer and worked fine. If I remove the > > Proxy connection it is unusable. > > I tried this several time and I have no doubt this was the solution. > > > > Any ideas as to why? > > I would really like to use it without the proxy connection. > > > > Mark > > > > On Jan 14, 2008 8:16 AM, Mark Rhoades < [EMAIL PROTECTED]> wrote: > > I thought about that yesterday and was going to try it but didn't > > find the correct information for the demo server. I found > > demo.echovnc.com:1328 > > > > I will give that a try. > > > > > > On Jan 14, 2008 6:44 AM, Scott Best < [EMAIL PROTECTED]> wrote: > > Mark: > > > > I'm not sure that this will affect your results much, but the > > latest > > build of EchoVNC is version 2.32, which you can get here: > > > > http://www.echogent.com/download_echovnc.htm > > > > Also, do you see the same problem when connected to our > > demo echoServer? Please try " demo2.echovnc.com ", with the > > password "demo2008". That will help isolate where the issue could > > be. > > > > cheers, > > Scott > > > > On Jan 13, 2008, at 11:28 PM, Mark Rhoades wrote: > > > > > The EchoServer is 1.61 > > > > > > EchoVNC is 2.20 according to the Exe version stamp under windows. > > > > > > On Jan 13, 2008 9:08 PM, Scott Best < [EMAIL PROTECTED] > wrote: > > > Mark: > > > > > > Hello! Those are some surprising results. I expect the > > relayed > > > connection > > > to be a *little* slower, but not *broken* slower. Exactly what > > version > > > of EchoVNC, > > > echoServer, and Windows OS are you running? > > > > > > -Scott > > > > > > On Jan 11, 2008, at 7:54 AM, Mark Rhoades wrote: > > > > > > > Hello all, > > > > > > > > I am hope somebody can help me with this problem. I have tried > all > > > > kinds of setting in EchoVNC to try and get this to work. > > > > > > > > I have a EchoServer setup on a linux box (hosted Virtual Private > > > > Server). > > > > The remote computers can connect to the EchoServer. > > > > I can can see them an initiate a connection. > > > > It asks for the password and then starts to show the remote > > screen. > > > > I get about 1/6th of the screen fairly quickly > > > > The rest of the screen either never shows up or takes a very > long > > > > time to display (10 minutes or longer). > > > > > > > > All of the sites are on high speed broadband. > > > > > > > > I am on a 15meg x 2meg connection > > > > EchoServer is on a 1meg x 1meg connection > > > > Remote site is on a 512k x 512k connection > > > > > > > > I have been able to connect point to point eliminating the > > > > EchoServer and everything works well. > > > > Once the EchoServer is in place there is extreme slowness. > > > > > > > > Any ideas on how to solve this? > > > > > > > > Thanks, > > > > Mark ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Echovnc-users mailing list Echovnc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/echovnc-users
