Thanks for quick reply:) it is an ertec400 board. it has 4 ethernet ports and it looks functional since the LEDs are on. however, there is another ethernet controller which is SMSC91C111 as a debug port. this one doesn't work, no LED action, no link up. the ethernet driver for SMSC91C111 is included in ecos packages, I can see that in ecc file. however, I am not sure it is also being used by redboot binary. how can I make sure of that?
On Thu, Mar 5, 2009 at 2:15 PM, Gary Thomas <[email protected]> wrote: > ATILAY YILMAZ wrote: >> does anybody help me about starting networking on redboot? I use an arm9 cpu >> I guess I need to set MAC address, but it doesn't appear on fconfig >> >> here is my current config on redboot: >> RedBoot> fis list >> Name FLASH addr Mem addr Length Entry point >> RedBoot 0x30000000 0x30000000 0x00040000 0x00000000 >> FIS directory 0x303F0000 0x303F0000 0x0000F000 0x00000000 >> RedBoot config 0x303FF000 0x303FF000 0x00001000 0x00000000 >> RedBoot> fconfig >> Run script at boot: false >> Use BOOTP for network configuration: false >> Gateway IP address: >> Local IP address: 192.168.3.17 >> Local IP address mask: 255.255.255.0 >> Default server IP address: 192.168.3.18 >> DNS domain name: <Not a string: 0x23FEF2F5> >> DNS server IP address: >> GDB connection port: 9000 >> Force console for special debug messages: false >> Network debug at boot time: true >> RedBoot> > > Whether or not the ESA shows up in 'fconfig' depends on the driver. > > What's the platform? network driver? > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
