Please don't top-post :-( ATILAY YILMAZ wrote: > Thanks for quick reply:) it is an ertec400 board. it has 4 ethernet > ports and it looks functional since the LEDs are on. however, there is > another ethernet controller which is SMSC91C111 as a debug port. this > one doesn't work, no LED action, no link up. the ethernet driver for > SMSC91C111 is included in ecos packages, I can see that in ecc file. > however, I am not sure it is also being used by redboot binary. how > can I make sure of that?
Check the CDL? Look in the build directory to see if the driver for that device actually was built? Note: because of the way 'fconfig' works, once you succeed in getting this driver to build, you'll want to run 'fconfig -i' to reinitialize the database. Only then will the options to set the ESA be present. The driver should work with a fallback ESA until then though. > On Thu, Mar 5, 2009 at 2:15 PM, Gary Thomas <[email protected]> wrote: >> ATILAY YILMAZ wrote: >>> does anybody help me about starting networking on redboot? I use an arm9 cpu >>> I guess I need to set MAC address, but it doesn't appear on fconfig >>> >>> here is my current config on redboot: >>> RedBoot> fis list >>> Name FLASH addr Mem addr Length Entry point >>> RedBoot 0x30000000 0x30000000 0x00040000 0x00000000 >>> FIS directory 0x303F0000 0x303F0000 0x0000F000 0x00000000 >>> RedBoot config 0x303FF000 0x303FF000 0x00001000 0x00000000 >>> RedBoot> fconfig >>> Run script at boot: false >>> Use BOOTP for network configuration: false >>> Gateway IP address: >>> Local IP address: 192.168.3.17 >>> Local IP address mask: 255.255.255.0 >>> Default server IP address: 192.168.3.18 >>> DNS domain name: <Not a string: 0x23FEF2F5> >>> DNS server IP address: >>> GDB connection port: 9000 >>> Force console for special debug messages: false >>> Network debug at boot time: true >>> RedBoot> >> Whether or not the ESA shows up in 'fconfig' depends on the driver. >> >> What's the platform? network driver? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
