Atilay Yilmaz wrote: > On Thu, Mar 5, 2009 at 2:34 PM, Gary Thomas <[email protected]> wrote: >> Please don't top-post :-( >> >> ATILAY YILMAZ wrote: >>> Thanks for quick reply:) it is an ertec400 board. it has 4 ethernet >>> ports and it looks functional since the LEDs are on. however, there is >>> another ethernet controller which is SMSC91C111 as a debug port. this >>> one doesn't work, no LED action, no link up. the ethernet driver for >>> SMSC91C111 is included in ecos packages, I can see that in ecc file. >>> however, I am not sure it is also being used by redboot binary. how >>> can I make sure of that? >> Check the CDL? >> Look in the build directory to see if the driver for that device actually >> was built? >> >> Note: because of the way 'fconfig' works, once you succeed in getting >> this driver to build, you'll want to run 'fconfig -i' to reinitialize >> the database. Only then will the options to set the ESA be present. >> The driver should work with a fallback ESA until then though. >> >>> On Thu, Mar 5, 2009 at 2:15 PM, Gary Thomas <[email protected]> wrote: >>>> ATILAY YILMAZ wrote: >>>>> does anybody help me about starting networking on redboot? I use an arm9 >>>>> cpu >>>>> I guess I need to set MAC address, but it doesn't appear on fconfig >>>>> >>>>> here is my current config on redboot: >>>>> RedBoot> fis list >>>>> Name FLASH addr Mem addr Length Entry point >>>>> RedBoot 0x30000000 0x30000000 0x00040000 0x00000000 >>>>> FIS directory 0x303F0000 0x303F0000 0x0000F000 0x00000000 >>>>> RedBoot config 0x303FF000 0x303FF000 0x00001000 0x00000000 >>>>> RedBoot> fconfig >>>>> Run script at boot: false >>>>> Use BOOTP for network configuration: false >>>>> Gateway IP address: >>>>> Local IP address: 192.168.3.17 >>>>> Local IP address mask: 255.255.255.0 >>>>> Default server IP address: 192.168.3.18 >>>>> DNS domain name: <Not a string: 0x23FEF2F5> >>>>> DNS server IP address: >>>>> GDB connection port: 9000 >>>>> Force console for special debug messages: false >>>>> Network debug at boot time: true >>>>> RedBoot> >>>> Whether or not the ESA shows up in 'fconfig' depends on the driver. >>>> >>>> What's the platform? network driver? >> -- >> ------------------------------------------------------------ >> Gary Thomas | Consulting for the >> MLB Associates | Embedded world >> ------------------------------------------------------------ >> > > well, cdl for driver (CYGPKG_DEVS_ETH_ARM_ERTEC) is > \ecos\packages\devs\eth\arm\ertec\current\cdl\ertec_eth_drivers.cdl > and also CYGPKG_DEVS_ETH_ARM_ERTEC exists in ecos.db. the c file is > under \ecos\packages\devs\eth\arm\ertec\current\src. however, it is > not built under \ECOS\EB400_build\devs\eth\arm\ertec\current\ (this > is my location for eclipse project). what may be the reason for that?
Look in 'ecos.ecc' - it will tell you why -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
