Stephen,
You are the man!
Once enabled, ifconfig is all what I need.
________________________________
From: Stephen Polkowski <step...@centtech.com>
To: Toto Lebolo <toto_leb...@yahoo.com>
Cc: "edk2-devel@lists.sourceforge.net" <edk2-devel@lists.sourceforge.net>
Sent: Friday, June 28, 2013 1:34 PM
Subject: Re: [edk2] ifconfig: Locate protocol error 'Ip4Config protocol'
Typically, you need to enable the UEFI network stack in the system BIOS
first. Uefi networking isn't enabled by default. The setting
is usually hidden away in some obscure menu. Good luck finding it.
Stephen
Toto Lebolo wrote:
> I am trying to get the network stack up with the shell. I am with the x64
> model running on Intel Romley platform.
> I am getting this error with ifconfig: Locate protocol error 'Ip4Config
> protocol'
>
> Here the few lines I run:
>
> load DRIVERS\E5309X3.EFI
> cd EFI\TOOLS
> load tcpipv4.efi
> ifconfig lo0 inet 127.0.0.1
> load dhclient.efi
>
>
> Anybody can help?
> MiKL~
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
-- Stephen Polkowski
Centaur Technology
Austin, TX
(512) 418-5730
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
