Hello,
As suggested, we placed only uefi.rom in the PCIE optrom, our UEFI driver
is getting loaded during boot.
But if i keep both the legacy optrom images, and UEFI driver rom image, i
below the other in the optrom space, my UEFI driver is not getting loaded.
Any additional changes required to make both images co-exist. Please advise.
Regards,
Sushma.S
On Mon, Aug 4, 2014 at 11:17 AM, Onipchuk Vladimir <v-onipc...@yandex.ru>
wrote:
>
> >>> We are able to successfully load the UEFI driver ROM using loadpicrom
> UEFI
> >>> shell command.
>
> During loadpcirom command please make sure what "start" function was
> loaded (not just "entrypoint").
>
>
> >>> In the PCIE card optrom layout We placed this UEFI driver ROM image,
> below
> >>> the legacy optrom image and flashed the same on the PCIe card.
>
> Try to place only UEFI driver ROM image on the PCIe card.
>
> Thanks,
> Vladimir
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
>
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
