> I confirm that without being registered to ekiga.net, calling > [email protected] does not work. This might be your "problem" with the > microphone. > >> Furthermore, I do not see any problem with the microphone. The problem >> is that no connection is established. Is that right? >>
I'm not so much worried about calling 500, it's more that I cannot make regular calls. Incoming calls can be answered and heard, but no outgoing sound is transmitted. I assume this means a connection is established though, no? The microphone is not muted in any way and records in other audio programs and is regularly used successfully with skype. Thanks for your help. >>>>> ekiga -d 4 output is posted here. >>>>> <http://www.4shared.com/document/RF_HTmAa/output.html> >>>> Please use a service which does not force to wait, such as dl.free.fr or >>>> pastebin. >>>> >>>> Looking at your output, I see that the communication is not established, >>>> is that right? Why do you say that you hear the audio? >>>> >>>> In the above log I also see that you are not registered to ekiga.net, >>>> and I wonder if it is possible to cal [email protected] without being >>>> registered (I cannot test right now). >>>> >>>>> On 08/25/2011 07:28 AM, [email protected] wrote: >>>>>>> Hello, >>>>>>>> I've just installed Ekiga 3.2.7 on OpenSuse 11.4, >>>>>>>> 2.6.37.1-1.2-desktop, >>>>>>>> on a Thinkpad T410 (single audio combo jack). >>>>>>>> >>>>>>>> I've followed the Audio Setup page, set all audio devices to the >>>>>>>> Default >>>>>>>> (PTLIB/ALSA) (and later everything else just to check), I >>>>>>>> confirmed that >>>>>>>> my ALSA configuration was working properly as both echo tests >>>>>>>> functioned >>>>>>>> flawlessly: >>>>>>>> >>>>>>>> $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D >>>>>>>> plughw:0,0 >>>>>>>> -c 1 -r 8000 -f S16_LE - >>>>>>>> $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D >>>>>>>> plughw:0,0 >>>>>>>> -c 1 -r 16000 -f S16_LE - >>>>>>>> >>>>>>>> But I am unable to perform an echo test within Ekiga. I can receive >>>>>>>> calls and hear the audio, but the microphone will not pick >>>>>>>> anything up. >>>>>>>> Looking at other archives, I didn't see a solution that worked >>>>>>>> for me. >>>>>>>> >>>>>>>> More info that might be useful: >>>>>>>> $ alsamixer >>>>>>>> tells me that Master and Capture are both 100% >>>>>>>> >>>>>>>> $/sbin/lspci | grep Aud >>>>>>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset >>>>>>>> High Definition Audio (rev 06) >>>>>>>> >>>>>>>> The codecs are set to their defaults: Speex, PCMU, PCMA, silence >>>>>>>> detection and echo cancelation are not enabled. >>>>>>>> >>>>>>>> The same headpiece performs under skype. >>>>>>>> >>>>>>>> I'm happy to send any other information. >>>>>> Send us the -d 4 output when calling [email protected] and when you speak >>>>>> you do not ehar yourself. > > ------------------------------ > > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list > > End of ekiga-list Digest, Vol 62, Issue 11 > ****************************************** _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
