On 14/09/11 00:06, Joseph Dumont wrote:
I confirm that without being registered to ekiga.net, calling
[email protected] does not work. This might be your "problem" with the
microphone.
Furthermore, I do not see any problem with the microphone. The problem
is that no connection is established. Is that right?
I'm not so much worried about calling 500, it's more that I cannot make
regular calls. Incoming calls can be answered and heard, but no outgoing
sound is transmitted. I assume this means a connection is established
though, no? The microphone is not muted in any way and records in other
audio programs and is regularly used successfully with skype. Thanks for
your help.
Yes, the connection is established.
In this case send us a -d 4 output when an incoming call arrives and you
receive sound and you do not send any sound.
ekiga -d 4 output is posted here.
<http://www.4shared.com/document/RF_HTmAa/output.html>
Please use a service which does not force to wait, such as dl.free.fr or
pastebin.
Looking at your output, I see that the communication is not established,
is that right? Why do you say that you hear the audio?
In the above log I also see that you are not registered to ekiga.net,
and I wonder if it is possible to cal [email protected] without being
registered (I cannot test right now).
On 08/25/2011 07:28 AM, [email protected] wrote:
Hello,
I've just installed Ekiga 3.2.7 on OpenSuse 11.4,
2.6.37.1-1.2-desktop,
on a Thinkpad T410 (single audio combo jack).
I've followed the Audio Setup page, set all audio devices to the
Default
(PTLIB/ALSA) (and later everything else just to check), I
confirmed that
my ALSA configuration was working properly as both echo tests
functioned
flawlessly:
$ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D
plughw:0,0
-c 1 -r 8000 -f S16_LE -
$ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D
plughw:0,0
-c 1 -r 16000 -f S16_LE -
But I am unable to perform an echo test within Ekiga. I can receive
calls and hear the audio, but the microphone will not pick
anything up.
Looking at other archives, I didn't see a solution that worked
for me.
More info that might be useful:
$ alsamixer
tells me that Master and Capture are both 100%
$/sbin/lspci | grep Aud
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 06)
The codecs are set to their defaults: Speex, PCMU, PCMA, silence
detection and echo cancelation are not enabled.
The same headpiece performs under skype.
I'm happy to send any other information.
Send us the -d 4 output when calling [email protected] and when you speak
you do not ehar yourself.
_______________________________________________
ekiga-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/ekiga-list
