I don't use an ekiga account but pay for a service with future-nine. At http://wiki.ekiga.org/index.php/Ekiga.net_VoIP_service_subscription they explicitly say this scenario is okay:
/"Can I register to multiple VoIP services ? / /Yes, you can register to multiple accounts in Ekiga; therefore you can take advantage of several services, whether free or commercial. There is no obligation for you to use Ekiga.net, but we do recommend it."/ With the login credentials for this non-ekiga account, I can use a landline to call my VOIP number, have it ring in ekiga, pick up to hear the audio from the incoming caller, but no sound is transmitted through the laptop microphone. Even if the echo test should fail because I don't have an ekiga account, I don't see where audio capture is breaking down when an actual call is connected. Both ALSA echo tests are functioning, and I can confirm the microphone continues to work with other applications. Thanks for the info on pastebin and dl.free.fr. >> ekiga -d 4 output is posted here. >> <http://www.4shared.com/document/RF_HTmAa/output.html> > Please use a service which does not force to wait, such as dl.free.fr or > pastebin. > > Looking at your output, I see that the communication is not established, > is that right? Why do you say that you hear the audio? > > In the above log I also see that you are not registered to ekiga.net, > and I wonder if it is possible to cal [email protected] without being > registered (I cannot test right now). > >> On 08/25/2011 07:28 AM, [email protected] wrote: >>>> Hello, >>>>> I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop, >>>>> on a Thinkpad T410 (single audio combo jack). >>>>> >>>>> I've followed the Audio Setup page, set all audio devices to the Default >>>>> (PTLIB/ALSA) (and later everything else just to check), I confirmed that >>>>> my ALSA configuration was working properly as both echo tests functioned >>>>> flawlessly: >>>>> >>>>> $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 >>>>> -c 1 -r 8000 -f S16_LE - >>>>> $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 >>>>> -c 1 -r 16000 -f S16_LE - >>>>> >>>>> But I am unable to perform an echo test within Ekiga. I can receive >>>>> calls and hear the audio, but the microphone will not pick anything up. >>>>> Looking at other archives, I didn't see a solution that worked for me. >>>>> >>>>> More info that might be useful: >>>>> $ alsamixer >>>>> tells me that Master and Capture are both 100% >>>>> >>>>> $/sbin/lspci | grep Aud >>>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset >>>>> High Definition Audio (rev 06) >>>>> >>>>> The codecs are set to their defaults: Speex, PCMU, PCMA, silence >>>>> detection and echo cancelation are not enabled. >>>>> >>>>> The same headpiece performs under skype. >>>>> >>>>> I'm happy to send any other information. >>> Send us the -d 4 output when calling [email protected] and when you speak >>> you do not ehar yourself. >
_______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
