Thanks for the reply. I read through that course (I'll probably end up there too someday). My limited understanding left me feeling like the PIC-EL was based on the PIC16F84A chip set, an 18-pin chip, while the SX28 is, like it's name suggests, a 28-pin chip.
I don't think they are physically or electronically compatible? Blake W7PQ On 7/18/04 5:41 PM, "John J. McDonough" <[EMAIL PROTECTED]> wrote: > The most recent PIC Elmer lesson did essentially the same thing. The PIC-EL > hardware kit sells for $35 but you could homebrew the same thing. The > PIC-EL includes the programmer and the software is all free. You can > download the lesson at the AmQRP site. > > 72/73 de WB8RCR http://www.qsl.net/wb8rcr > didileydadidah QRP-L #1446 Code Warriors #35 > > ----- Original Message ----- > From: "blake" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Sunday, July 18, 2004 7:35 PM > Subject: [Elecraft] Does anyone... > > >> I've just completed the Control Board and Front Panel for my new K2. It > has >> been immensely fun. But I'm worried the building fun will all come to an >> end far too abruptly. >> >> The good news is that I found a project to follow the K2. August QST >> describes a Code Player. A small Pic based, CW player. You can download >> your own text files to it and play them back, while driving to work when > the >> bands don't allow nary a signal to be heard on the HF bands. >> >> My challenge is that the SX28 chip requires a $100 Key to write the > program >> to its EEPROM. The article suggested the author could supply these, >> pre-programmed chips, but I have failed to get a response to my email >> inquiries. >> >> Does anyone have a SX28-Key that would be willing to program a chip for > me? >> (I'll supply the chip, code--from the ARRL site--and mailers.) >> >> TIA es 73 >> Blake >> W7PQ >> >> >> >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
