It could but I don't think it's too likely.  As far as misalignment is 
concerned, I think if you don't bend a pin and you carefully line up the 
pins and sockets and if the pins slide into the sockets freely as mine 
did, if there's any mis-alignment, there's a socket issue that's beyond 
my control.

Elecraft has circuit diagrams available on-line and I've spent quite a 
few hours lately studying them.  What I haven't seen are drawing of the 
circuit board traces which are common service information; having trace 
board drawings would really help in troubleshooting the problems.

I could, of course, just send it to Elecraft but that's not very 
appealing to me.  I've been a ham for fifty-five years and build, 
modified, ad repaired my own gear and other peoples.  I've done repairs 
and managed service depots for industrial vibration equipment.  One of 
the things that I've learned that if you send something with 
intermittent problems in for repair without knowing what is really 
wrong, there a good chance that you'll get it back without the problem 
really being cured.  I also have a good collection of test equipment.

Dunc, W5DC

Greg wrote:
> Is there a chance a pin got bent or misaligned when putting the boards 
> back together?
>
> 73
> Greg
> AB7R
>
>
> On 8/1/2010 10:28 AM, Duncan Carter wrote:
>   
>> K3, S/N 3543 with a recently exchanged dsp board.
>>
>> Dunc, W5DC
>>
>> Guy Olinger K2AV wrote:
>>    
>>     
>>> Is this a K3 or a K2?
>>>
>>> On Sun, Aug 1, 2010 at 12:22 PM, Duncan Carter<d...@vibrotek.com>  wrote:
>>>
>>>      
>>>       
>>>> I'm in process of slowly troubleshooting the same problem.  One thing
>>>> I've found is that there are intermittent ground resistance issues
>>>> between the front panel grounds and rear panel grounds.  I also had the
>>>> problem of intermittent HI RFI indications and perhaps, because of the
>>>> same problem, I have noise from other sources coupled to the line out
>>>> and other rear panel audio jacks.
>>>>
>>>> Dunc, W5DC
>>>>
>>>> n...@comcast.net wrote:
>>>>
>>>>        
>>>>         
>>>>> when i plug in the phones ...front panel.... the s meter goes up to 40 
>>>>> over....
>>>>>
>>>>> previous owner had plug and jack behind mic jack misaligned
>>>>> causing other issues with the phone jack being plugged in....no audio out 
>>>>> of spkr in "no: config,,,
>>>>>
>>>>> but why the s meter action ???/
>>>>>
>>>>>
>>>>> otherwise seems ok..
>>>>>
>>>>> bill
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft@mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>>
>>>>>
>>>>>          
>>>>>           
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft@mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>
>>>>        
>>>>         
>>>      
>>>       
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>    
>>     
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>   

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to