Nate, Check to see if you have Control Board U6 in the right way 'round. If it is backwards, the symptoms you report will be present along with the 5 volt regulator getting warm (hot if you leave it that way enough time). U6 usually survives that abuse.
73, Don W3FPR dogbulter wrote: > I am having an issue powering the K2 on. I am on page 43 of the K2 manual. I > do not have any display, audio, and I cannot hear any of the relays > clicking. I measured the power at the dc jack and have 13vdc. I also > measured the 5vdc and 8vdc power at the regulators. Both were good. I then > proceded to follow the troubleshooting instructions in the book and > everything else checks out. I listened to the 4mhz signal on another > receiver and heard it. > > Please let me know if anyone has any suggestions. > > Thank you, > > Nate > KA1YMX > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
