I double checked all of the connectors and compared them with the manual. They are Installed correctly. I do have an o-scope and I cannot get the 4 mhz signal around x2. I tried adjusting c22 and it did not help. I also checked all the components around x2.
Nate ----- Reply message ----- From: "Don Wilhelm-4 [via Elecraft]" <[email protected]> Date: Mon, Aug 16, 2010 9:51 pm Subject: K2 Initial Power up To: "dogbulter" <[email protected]> Nate, Check to see if you have Control Board U6 in the right way 'round. If it is backwards, the symptoms you report will be present along with the 5 volt regulator getting warm (hot if you leave it that way enough time). U6 usually survives that abuse. 73, Don W3FPR dogbulter wrote: > I am having an issue powering the K2 on. I am on page 43 of the K2 manual. I > do not have any display, audio, and I cannot hear any of the relays > clicking. I measured the power at the dc jack and have 13vdc. I also > measured the 5vdc and 8vdc power at the regulators. Both were good. I then > proceded to follow the troubleshooting instructions in the book and > everything else checks out. I listened to the 4mhz signal on another > receiver and heard it. > > Please let me know if anyone has any suggestions. > > Thank you, > > Nate > KA1YMX > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________ View message @ http://elecraft.365791.n2.nabble.com/K2-Initial-Power-up-tp5430109p5430320.html To unsubscribe from K2 Initial Power up, click http://elecraft.365791.n2.nabble.com/template/NodeServlet.jtp?tpl=unsubscribe_by_code&node=5430109&code=bmF0ZXNtYWxsQGhvdG1haWwuY29tfDU0MzAxMDl8LTgxODgyNTQ3MA== -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Initial-Power-up-tp5430109p5430367.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
