I'm not having any problem using LOGic 8 with the P3 connected the same way. Have not tried N1MM yet.
73, Gene N9SW ------------------------------ Message: 17 Date: Tue, 24 Aug 2010 11:40:35 -0700 From: Wayne Burdick <[email protected]> Subject: Re: [Elecraft] P3 fighting logging and contest programs To: [email protected] Cc: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes I'm forwarding this directly to the P3's designer, Alan, N1AL. He'll contact you. We're working to make sure there are no conflicts between the P3 and external software applications. 73, Wayne N6KR On Aug 24, 2010, at 11:29 AM, [email protected] wrote: > My P3 is causing problems with my logging program (Logic 8) and with > the N1MM contest logger. With the serial cable running to the P3 > and looping to the K3 the correct frequency is not being picked up > by Logic. N1MM is worse. Tuning the VFO on the K3 is tracked by > N1MM, but the K3 keeps jumping into FM or AM mode. Turning off the > FM mode in the K3 menu didn't stop it. If I use a "Y" cable to > feed the P3 and K3 all of these problems go away, but then the > frequency on the band scope dispay is bogus. Any one had this > happen? 73, K7UA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
