Ken,
The Band0-Band3 data is identical to Yaesu Band Data for
HF (160-6 meters). Any of the standard BCD to 1 of 10
or HEX to 1 of 16 decoders will work fine. If one were
using the K3 to drive a stack of transceivers and wanted
to be particularly clever, it is possible to use two
decoders if they have an enable input and use DIGOUT0
with a pull-up, buffer and inverter to select either HF/6
or transverter (VHF/UHF/SHF) outputs.
73,
... Joe, W4TV
On 10/7/2010 5:30 PM, Lee Buller wrote:
>
>
>
> Has anyone worked out the diode Matrix for the output of the K3 Band0 through
> Band3? I am stumbling through the logic here....and well...it has been many
> years since I thought about a diode matrix.
>
> Any figured this out yet? Did a quick search on Google and found most people
> are using the Elecraft product....but I have a specific idea in mind and need
> to
> figure the diode matrix.
>
> Lee - K0WA
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
