As is, it doesn't decode 6M. Additional logic and hardware would be
required to decode the 1010 BCD output for 6M.
73 de Brian/K3KO
On 10/7/2010 22:51, Dave Hachadorian wrote:
Here's a great inexpensive band decoder:
http://www.unifiedmicro.com/decoder.html
The outputs are open collector. If you need a 12vdc source
instead, you will need to have a line driver or relay for each
output.
Older K3's will require the External Band Data Pullup part of the
K3 Negative ALC and Ext Band Data Pull-up Mods in order to work
with this unit. Or, you can buy a REMIOUPGD modified KIO3 Board
from Elecraft for $20.
Newer K3's are good to go with no mods.
Dave Hachadorian, K6LL
Yuma, AZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.862 / Virus Database: 271.1.1/3182 - Release Date: 10/07/10
06:34:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 9.0.862 / Virus Database: 271.1.1/3182 - Release Date: 10/07/10
06:34:00
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
