James, I hope your daughter is feeling better soon.
Re your questions (based on my observations using sound card software on both channels from the LINE OUT jack, and stereo headphones plugged into the SPKRS jack): 1. The CONFIG:SPKRS setting only affects the rear panel SPKRS jack. It has no effect on LINE OUT. 2. None of the audio mixing or level controls has any effect on the LINE OUT signal, as far as I can tell. The left channel always carries the main RX output, and the right channel always carries the sub RX output. The LINE output is "raw" unmixed audio from the two receivers at a fixed level set by CONFIG:LIN OUT. 3. When CONFIG:SPKRS = 2, the SPKRS jack behaves the same as the headphone jacks. With SUB off, the main RX is in both channels, and with SUB on and the normal L-MIX-R setting, the main RX and sub RX are in left and right channels respectively. Changing the L-MIX-R setting affects the SPKRS the same way as it affects the PHONES output. When CONFIG:SPKRS = 1, the only speaker output is on the left channel of the SPKRS jack, i.e. it disables the right channel output even when SUB is on. If SUB is on, the external mono speaker on the left channel carries audio from both receivers mixed together, the same as the internal speaker. The purpose of the CONFIG:SPKRS = 1 option is to protect the speaker amp if a mono plug is plugged into the SPKRS jack. 73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
