Jim, About a third way down the page at http://wilcoxengineering.com/amateur-radio/elecraft-k2 I mentioned the Yaesu FT-100 knob part numbers that I used in my K2. Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40) 570-321-1516 http://WilcoxEngineering.com http://eBookEditor.net https://www.smashwords.com/books/view/28062?ref=awilcox Williamsport, PA 17701 On 1/21/11 6:51 PM, Jim Lowman wrote: > I guess I dropped off the list, and just re-subscribed. > > Some years ago there was a discussion about replacing the stock tuning > knob on the K2 with a heavier one with a finger dimple. > Could someone refresh my memory on what knob was used? > > I'm thinking about one that Ten-Tec sells; a heavier metal knob like I > used to replace the stock knob on my Argonaut V and 516/"6N2." > > Thanks in advance for any suggestions. > > 72/73 de Jim - AD6CW > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
