You're so right, Don. I forgot all about that goofy little pin that I had to break off! Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40) 570-321-1516 http://WilcoxEngineering.com http://eBookEditor.net https://www.smashwords.com/books/view/28062?ref=awilcox Williamsport, PA 17701 On 1/25/11 7:15 PM, Don Wilhelm wrote: > I used an FT-900 knob on my K2 for a while and enjoyed it -- The > FT-900 knob is larger than the FT-100 knob. > > I have since reverted to the stock K2 knob, but with the addition of an > FT-900 tire around it to protect my tuning thumb from the sharp corner > of the stock K2 knob. The FT-100 tire will also fit on the K2 knob, but > it is more of a stretch than the FT-900 tire. I know the FT-900 knob is > no longer available from Yaesu, but the tires may be. I have no current > information about the FT-100 knob not its tire. > > If you do use an FT-100 knob, break off the plastic pin in the shaft > recess so it mounts closer to the K2 front panel. > > 73, > Don W3FPR > > On 1/25/2011 6:31 PM, Alan D. Wilcox wrote: >> Jim, >> About a third way down the page at >> http://wilcoxengineering.com/amateur-radio/elecraft-k2 I mentioned the >> Yaesu FT-100 knob part numbers that I used in my K2. >> Cheers, Alan >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
