I used an FT-900 knob on my K2 for a while and enjoyed it -- The FT-900 knob is larger than the FT-100 knob.
I have since reverted to the stock K2 knob, but with the addition of an FT-900 tire around it to protect my tuning thumb from the sharp corner of the stock K2 knob. The FT-100 tire will also fit on the K2 knob, but it is more of a stretch than the FT-900 tire. I know the FT-900 knob is no longer available from Yaesu, but the tires may be. I have no current information about the FT-100 knob not its tire. If you do use an FT-100 knob, break off the plastic pin in the shaft recess so it mounts closer to the K2 front panel. 73, Don W3FPR On 1/25/2011 6:31 PM, Alan D. Wilcox wrote: > Jim, > About a third way down the page at > http://wilcoxengineering.com/amateur-radio/elecraft-k2 I mentioned the > Yaesu FT-100 knob part numbers that I used in my K2. > Cheers, Alan > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
