Hello:
After returning my K3 back to the shack after Field Day, I have discovered that 6M no longer transmits with low SWR. I checked all the rear panel connections as it is interfaced through a microham MK2R+ and Stationmaster band decoder. However, I have the 6M antenna coax directly going to Antenna 2 on the radio. Using an antenna analyzer, the antenna shows excellent SWR. Using a dummy load to each antenna port, all bands shows good SWR except 6M. I updated the firmware and cycled the power but I still have the HI SWR showing with 6M. I do have the PR6 pre-amp in line, but the problem is not receive. I'm stumped. Any help appreciated. 73, Jamie WB4YDL -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
