Matt, Did you use the same cable to connect to the 2nd rig as you are using to connect to LP-Pan? It would not be the first time a faulty cable was to blame.
73, Don W3FPR On 3/4/2012 2:38 PM, Matt Murphy wrote: > Thanks to Iain and the others who responded off the reflector. I plugged > in the K3's IF output to the second rig's sub RX input and sure enough > heard the same signals. When the Sub-RX was set to 8.215 MHz it appeared > that there was about a -1.3 KHz difference between the VFO position that > would tune in the signal on the K3 vs via the IF. I imagine this is normal > (someone please let me know if it's not). > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
