Don -- Yes, same cable. I just had a faulty audio cable from radio shack the other day.
73, Matt NQ6N On Sun, Mar 4, 2012 at 12:02 PM, Don Wilhelm <[email protected]> wrote: > Matt, > > Did you use the same cable to connect to the 2nd rig as you are using to > connect to LP-Pan? > It would not be the first time a faulty cable was to blame. > > 73, > Don W3FPR > > > On 3/4/2012 2:38 PM, Matt Murphy wrote: > >> Thanks to Iain and the others who responded off the reflector. I plugged >> in the K3's IF output to the second rig's sub RX input and sure enough >> heard the same signals. When the Sub-RX was set to 8.215 MHz it appeared >> that there was about a -1.3 KHz difference between the VFO position that >> would tune in the signal on the K3 vs via the IF. I imagine this is >> normal >> (someone please let me know if it's not). >> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
