This is a very good suggestion, unless you need to use voice/cw memories. Even when you call voice memories from a software, it mimics pressing the front panel's button!
73, Felipe Ceglia - PY1NB ------------------------------------------------------------------------------------- PR1T team member /// Rio DX Group member /// Araucaria DX Group member http://dxwatch.com /// http://reversebeacon.net /// http://riodxgroup.com On Mon, Mar 5, 2012 at 1:08 PM, Rich - K1HTV <[email protected]> wrote: > Jim, > If you are tired of spinning your K3 VFO from one end of the band to the > other, and also switching modes when you get there, you might consider this > suggestion. On each band, you can easily set up 4 different go-to > frequencies > using the four (M1-4) memory buttons. On each band and for each of 4 > modes, tune > VFO-A to the desired frequency, set both VFOs to the same frequency (tap > A>B > twice), select a mode, and optimize your filter settings. > > To store these settings in one of the four memories: > Tap the V>M button once. > Tap the M# (1-4) button that you want to use for that frequency/mode. > > Do this for each of four mode/frequency/filter combinations on each of the > bands > from 160M to 6M. On each band I use M1 for CW, M2 for SSB, M3 for PSK31 > and > M4 for RTTY. On 30M, where SSB is not allowed, I substituted the WSPR > frequency/mode info for the M3 memory. You can make changes based on your > mode/frequency preferences. > > To quickly switch to one of the M1-4 memories: > Tap the M>V button once. > Tape the M# (1-4) once. > > This will allow you to quickly move you between frequencies and modes on > each > band. > > I hope that you find this info useful. > > 73, > Rich - K1HTV > > = = = > > -----Original Message----- > From: bill ny9h [mailto:[email protected]] > Sent: Sunday, March 04, 2012 12:20 PM > To: Jim McDonald; [email protected] > Subject: Re: [Elecraft] K3 feature request - auto-changing tuning rate > > i do tire of spinning that know from ssb to cw..... > > what's the harm if it can be shut off?? > pse ...when you have some spare time wayne.... > > > bill ny9h/3 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
