*Frank, Tap to turn on NR and turn off NR
Whether NR is on or off, a HOLD (1 sec) the NR will bring up adjustment, variable via VFO B There is no current facility to change the setting by SAVING it to a PF key which was the original inquiry. I have not had a Yaesu in my shack since I discarded the FTdx9000D and I thought that enough time had passed that Yaesu would have fixed that issue, but, apparently not? I have never found a need to do this as I have had the K3 long enough to get all my settings right. If a transceiver needs to have this adjusted continuously during qso's then I sure don't one of those. :-) YMMV 73 * On 3 September 2012 08:23, W6NEK <[email protected]> wrote: > Gary, > As I understand it, just a TAP of the NR button will toggle the NR > function On and Off. > TAP & HOLD will place the NR into adjustment mode so the NR profile can be > changed. > Fred asked: "is there a way to continuously adjust the DNR from the very > lowest to the most aggressive with a dial while listing"? > As far as I know NR TAP & HOLD (NR ADJ) is the only way to accomplish what > he wants. > > Is there an easier way that I missed? > 73... Frank - W6NEK > > ----- Original Message ----- > From: Gary Gregory > To: W6NEK > Cc: [email protected] > Sent: Sunday, September 02, 2012 2:28 PM > Subject: Re: [Elecraft] K3 DNR > > > Fred, > > Just a TAP of the NR is all that is needed. No need to HOLD > > 73 > > > On 3 September 2012 02:57, W6NEK <[email protected]> wrote: > > Hi Fred, > I agree that the 15 step DNR control on the FT5000 is a very useful and > effective function. To gain access to the K3 NR settings you need to > press > and hold the NR button (NR ADJ). The settings will appear in the VFO B > portion of the display. There are a total of 32 noise reduction steps > with > the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining 16 > tailored for SSB mode (F5-1 thru F8-4). While not as convenient as the > variable NR setting on the FT5000, it's just as effective. You can > read all > about it on page 25 of the Operating Manual. > > 73, > Frank - W6NEK > > ----- Original Message ----- > From: "Fred Smith" <[email protected]> > To: <[email protected]> > Sent: Sunday, September 02, 2012 2:39 AM > Subject: [Elecraft] K3 DNR > > > <SNIP> > > Being rather new to Elecraft I have only had my K3's for about a > month I'm > > still searching for a way to continuously adjust the DNR from the > very > > lowest to the most aggressive with a dial while listing. I'm able to > do > > this > > with my FTDX-5000 and find it to be one of my most used features and > most > > effective I might add with that ability. > > > > > > > > Is there a way for me to setup a knob to adjust the DNR like that in > the > > K3, > > I'm sure there must be and it's just me not finding it, that good of > a > > feature I'm sure would not be left out. > > > > > Thx to all & 73, > > Fred/N0AZZ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > > -- > Gary > Start the day off slow, then taper off......... > K3 #679 > KPA500FT #18 > KAT500FT 007 > P3 #1629 > > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date: 09/02/12 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- *Gary* *Start the day off slow, then taper off.........* K3 #679 KPA500FT #18 KAT500FT 007 P3 #1629 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
