Thank you Frank for your help and I am finished also wish I had never posted sorry.
73, Fred/N0AZZ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of W6NEK Sent: Sunday, September 02, 2012 8:18 PM To: [email protected] Subject: Re: [Elecraft] K3 DNR For anyone following this post, does Abbot and Costello's "Who's on first" routine ring any bells? I'm done, now back from whence I came, Frank - W6NEK ----- Original Message ----- From: Gary Gregory To: W6NEK Cc: [email protected] Sent: Sunday, September 02, 2012 4:00 PM Subject: Re: [Elecraft] K3 DNR Frank, Tap to turn on NR and turn off NR Whether NR is on or off, a HOLD (1 sec) the NR will bring up adjustment, variable via VFO B There is no current facility to change the setting by SAVING it to a PF key which was the original inquiry. I have not had a Yaesu in my shack since I discarded the FTdx9000D and I thought that enough time had passed that Yaesu would have fixed that issue, but, apparently not? I have never found a need to do this as I have had the K3 long enough to get all my settings right. If a transceiver needs to have this adjusted continuously during qso's then I sure don't one of those. :-) YMMV 73 On 3 September 2012 08:23, W6NEK <[email protected]> wrote: Gary, As I understand it, just a TAP of the NR button will toggle the NR function On and Off. TAP & HOLD will place the NR into adjustment mode so the NR profile can be changed. Fred asked: "is there a way to continuously adjust the DNR from the very lowest to the most aggressive with a dial while listing"? As far as I know NR TAP & HOLD (NR ADJ) is the only way to accomplish what he wants. Is there an easier way that I missed? 73... Frank - W6NEK ----- Original Message ----- From: Gary Gregory To: W6NEK Cc: [email protected] Sent: Sunday, September 02, 2012 2:28 PM Subject: Re: [Elecraft] K3 DNR Fred, Just a TAP of the NR is all that is needed. No need to HOLD 73 On 3 September 2012 02:57, W6NEK <[email protected]> wrote: Hi Fred, I agree that the 15 step DNR control on the FT5000 is a very useful and effective function. To gain access to the K3 NR settings you need to press and hold the NR button (NR ADJ). The settings will appear in the VFO B portion of the display. There are a total of 32 noise reduction steps with the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining 16 tailored for SSB mode (F5-1 thru F8-4). While not as convenient as the variable NR setting on the FT5000, it's just as effective. You can read all about it on page 25 of the Operating Manual. 73, Frank - W6NEK ----- Original Message ----- From: "Fred Smith" <[email protected]> To: <[email protected]> Sent: Sunday, September 02, 2012 2:39 AM Subject: [Elecraft] K3 DNR <SNIP> > Being rather new to Elecraft I have only had my K3's for about a month I'm > still searching for a way to continuously adjust the DNR from the very > lowest to the most aggressive with a dial while listing. I'm able to do > this > with my FTDX-5000 and find it to be one of my most used features and most > effective I might add with that ability. > > > > Is there a way for me to setup a knob to adjust the DNR like that in the > K3, > I'm sure there must be and it's just me not finding it, that good of a > feature I'm sure would not be left out. > > > Thx to all & 73, > Fred/N0AZZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary Start the day off slow, then taper off......... K3 #679 KPA500FT #18 KAT500FT 007 P3 #1629 No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date: 09/02/12 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Gary Start the day off slow, then taper off......... K3 #679 KPA500FT #18 KAT500FT 007 P3 #1629 No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date: 09/02/12 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5244 - Release Date: 09/02/12 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
