Do you have a saved K3 configuration file? If so, do an EEINIT (see
Parameter Initialization in the manual) and reload the configuration.
That will give you something to accomplish while waiting for the support
people to wake up this morning.
73,
Don W3FPR
On 11/26/2012 3:41 AM, chas wrote:
Hi Gary,
I was using text decode on transmit when suddenly very few of the
buttons on the front panel of the K3 would perform their normal
function. Some produced no response ie - MENU and CONFIG do not work
at all, SUB does not work at all. Many buttons produce a response
which is completely different from their intended function. The K3 is
totally unusable.
I tried to install the latest firmware and got the following on the K3
screen:
E O2OCOC
ERR DSE
Firmware failed to load
I now have a very expensive piece of equipment that is totally unusable.
I have the KAT500 on order but I am wondering if I should cancel that
order as I will not be able to use it.
Can you please advise me of a way forward?
73 from Charles Rodgers - M0BIN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
