Can you try the steps in K3 Utility Help, Troubleshooting, MCU Load Failure, and reload load all firmware?
73 Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of chas Sent: Monday, November 26, 2012 4:48 AM To: [email protected]; elecraft; Gary Gregory Subject: Re: [Elecraft] K3 Problems On 26/11/2012 12:19, Don Wilhelm wrote: > Do you have a saved K3 configuration file? If so, do an EEINIT (see > Parameter Initialization in the manual) and reload the configuration. > > That will give you something to accomplish while waiting for the > support people to wake up this morning. > > 73, > Don W3FPR Thank you Don, but you need to read my latest reply to Gary. The SHIFT LO NORM button is not working correctly - so what you are both suggesting will not work. I have read the Parameter Initialisation page in the manual. I have tried reinstalling the Configuration Menu. Until you appreciate that the K3 front panel buttons are all totally corrupted then any cure to this problem cannot be found. Charles - M0BIN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
