Could it be/affect a 40% difference? Chuck, KE9UW Lionel Trains, TCA, LCCA, LRRC aka Jack, BMW Motorcycles BMWMOA #224
________________________________________ From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Don Wilhelm [w3...@embarqmail.com] Sent: Sunday, December 23, 2012 3:51 PM To: Ian Kahn - Ham Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] New Output Power Issue Ian, If you use K3 Utility to do that calibration, if there is a need to set a specific frequency, I am certain the Utility does it for you. 73 & Happy Holidays to all (Merry Christmas for those of us who celebrate it), Don W3FPR On 12/23/2012 4:28 PM, Ian Kahn - Ham wrote: > Several people suggested I run the "Calibrate transmitter gain" on my > rig, which I'll do. But I have one question about the calibration > that hopefully someone here can answer - does it matter what > frquency/portion of the band I'm in on each band when I run the > calibration test? Or do I just need to be somewhere in-band on each > band? > > Thanks to everyone for their suggestions and assistance. If my rig > passes this calibration test, there are a few other things that have > been suggested which I'll check. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html