Had a situation this morning where my two macros started giving me goofy
responses, and eventually would lock up my K3. The K3 still worked OK, and all
was cleared up with a power off/on. I couldn't get the macros to work
consistently, no matter what I tried, including the 'soft' reset'. So, I
reloaded my firmware (4.60) and this apparently corrected the failure. I had
been toying with several different macros and wonder if my playing around
somehow fouled things up. I only have 2 macros: PF1 HOLD to put the rig into CW
and PF2 HOLD to put the rig into FSK. These are simple macros (thanks K1HTV)
and have been working without a hitch, until I attempted to get fancy.
My questions are:
Is it possible to fill up the macro memory slots, even when they appear empty?
Is there a way to clear/reset ALL the macros without reloading the firmware?
(this seemed to fix my problem)
Additional curiosity: I was getting an FT0 on the terminal screen over and over
of the utility program when things were fouled/locked up. Radio was NOT in
split. I do not have the SR.
The radio and macros are now working as they should, but somehow I am sure I
messed it up somehow. Any ideas?
Thanks...
Jim Bob Buckeye
AKA
**** Jim Leder****
K8CXM since 1961
IBM retiree since 1999
There are 10 types of people in this world -- those who understand binary
and those who don't.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
