Seems something in the firmware got out of sorts by my screwing
around with those two macros, but I don't know how.
I could see how things might get screwed up ... it looks like those
are recursive (calling themselves over and over again). What are you
trying to accomplish?
73,
... Joe, W4TV
On 2/16/2013 2:12 PM, Jim Leder (Hotmail) wrote:
The 2 macros I use work OK since I reloaded the firmware. I tried so
many different, fancy things prior to getting messed up, I'm not sure
what they were now, but it was a lot. That's when I attempted to go back
to what I knew was OK, but they didn't work either. That's when I got
desperate and as a last resort, reloaded the 4.60 firmware.
Here are the two ORIGINAL macros that now work once again:
CW MD3;BW0040;SWH45;MN255; /* PF1 hold */
FSK MD6;DT2;BW0050;SWH47;MN255; /* PF2 hold */
Seems something in the firmware got out of sorts by my screwing around
with those two macros, but I don't know how.
Thanks ... 73
Jim
--------------------------------------------------
From: "Tom H Childers" <[email protected]>
Sent: Saturday, February 16, 2013 1:59 PM
To: "Jim Leder (Hotmail)" <[email protected]>
Cc: <[email protected]>
Subject: Re: [Elecraft] Macros
Jim,
Can you send us the macro's you are having trouble with?
Maybe we can help you with them.
Thanks,
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 16 Feb 2013 13:41:00 -0500, "Jim Leder \(Hotmail\)"
<[email protected]> wrote:
Had a situation this morning where my two macros started giving me
goofy responses, and eventually would lock up my K3. The K3 still
worked OK, and all was cleared up with a power off/on. I couldn't get
the macros to work consistently, no matter what I tried, including
the 'soft' reset'. So, I reloaded my firmware (4.60) and this
apparently corrected the failure. I had been toying with several
different macros and wonder if my playing around somehow fouled
things up. I only have 2 macros: PF1 HOLD to put the rig into CW and
PF2 HOLD to put the rig into FSK. These are simple macros (thanks
K1HTV) and have been working without a hitch, until I attempted to
get fancy.
My questions are:
Is it possible to fill up the macro memory slots, even when they
appear empty?
Is there a way to clear/reset ALL the macros without reloading the
firmware? (this seemed to fix my problem)
Additional curiosity: I was getting an FT0 on the terminal screen
over and over of the utility program when things were fouled/locked
up. Radio was NOT in split. I do not have the SR.
The radio and macros are now working as they should, but somehow I am
sure I messed it up somehow. Any ideas?
Thanks...
Jim Bob Buckeye
AKA
**** Jim Leder****
K8CXM since 1961
IBM retiree since 1999
There are 10 types of people in this world -- those who understand
binary
and those who don't.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
