Either that (works on FM, too) or simply press the TUNE button (not ATU TUNE), it's there exactly for that, putting out a steady carrier, no matter which mode. ;-) Besides this the K3 (assuming you are talking about that as no mention of the radio) well has a separate input for a straight key that could be used, too.
73, Olli - DH8BQA Am 16.01.2014 09:13, schrieb Fred Smith:
I use a Data Mode and the transmit button to do the same. 73, Fred/N0AZZ K3 Ser # 6730--KX3 # 5210--K2/100 # 6470-KAT100 P3/SVGA--KAT500--W2 Amps Elecraft KPA500 HF/6m--Alpha's 9500 HF--87A HF--Mirage B-5030-G 300+w--(2) B-5016-G's 165w 2m -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of WILLIS COOKE Sent: Wednesday, January 15, 2014 11:21 PM To: Bob KD7YZ; K3 List Subject: Re: [Elecraft] How do I generate a "Key Down" to tune an external 6m amp? The easy way is to hold the dash on the bug. If you want to use a straight key just wire it across the terminals on the bug. You don't need but one key input. The way the old telegraphers used a bug was to insert the flat connector between the base and the copper/brass strip that connects to the contact on the straight key and the straight key was permanently bolted to the desk and wired to the telegraph line. Willis 'Cookie' Cooke, TDXS DX Chairman K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart ________________________________ From: Bob KD7YZ <kd...@denstarfarm.us> To: K3 List <elecraft@mailman.qth.net> Sent: Wednesday, January 15, 2014 8:13 PM Subject: [Elecraft] How do I generate a "Key Down" to tune an external 6m amp? My Old viproplex Bug does the cw for me and there seems to not be an available jack for an old straight key. I have configured some settings in order to keep me form applying power before a PTT action closes a sequencer. Thus I seem to have made it so that pressing Xmit or hold-xmit/Tune will NOT issue a PTT action however will send out RF. This does not close PTT anywhere so the Sequencer does bot close the relay on the PA and I can't rune it up. I can push the foot-switch and the relays all close. However, there is no steady RF. Just what I can make in dots or dashes Is there a way to get key-down WITH a closed PTT so external 6m PA comes on?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html