If you use K9YC's suggested EQ you will be very close to 2.3/2.4 KHz audio - particularly if 400 and 3200 are set to -16 dB. Try it ...
73, ... Joe, W4TV On 4/27/2014 7:41 PM, XE3/K5ENS via Elecraft wrote:
I've been asking for the ability to narrow the transmit bandwidth on the K3 for years. That would make a better contest radio. But alas all I hear is it's on the list. Keith A friend of mine has a flex and can vary his transmitter BW we ran some tests and as I told Dick,, if ur gonna chase DX as you narrow your signal to 2 K or so with the same mike gain etc really gives you punch with better average power but no increase in distortion,, well not much observing it on the P3 taking it much less than that does cause distortion bad sounding audio but if you know any folk with a flex get them to do the same test interesting to observe on the P3 Dick still likes to use ESSB but not when 75 is very active long thread fer sure HAR Bob K3DJC -- View this message in context: http://elecraft.365791.n2.nabble.com/Is-there-a-reason-the-receive-is-so-Skinny-tp7587977p7588018.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
