Just to be more clear. The AL1200 takes a full 100W to drive. That's how I found out I had a problem. When I did the transmitter gain calibration I ren directly from the rig thru my LP-100A watt meter then to the dummy load. I tried changing out the coax and the swr was at 1.05 or less at all times. I had the tuner bypassed and I calibrated at 5w and 50w like the manual says to do using the K3 utility. I have done this a number of times and have the same results. I can only get 100w out on 12 and 30m.
Greg (K9ON) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
