Julie,
Check to be certain Compression is set to zero.
If it was not set to zero, you should also re-adjust the audio level
(either with the computer soundcard level settings or the KX3 Mic Gain).
73,
Don W3FPR
On 5/24/2014 9:28 AM, [email protected] wrote:
Hello to all! Our KX3 that Larry uses for PSK has mysteriously developed an
unstable ALC bar setting.
If we use the mic gain to set it for 4 bars while transmitting, then on the
next transmission, without our having touched any controls, it goes back up to
6 or 7 bars.
Any ideas what could have changed to make this happen?
We must have inadvertently changed something but I don't know what.
THANKS!
Julie KT4JR and Larry K4MWE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
