They may not be using the DATA mode; many folks
use USB for PSK31 -- but then compression can be
an issue.
Come to think of it, it would be good to know just
how they are set up -- which mode, which modem
(e.g., SignaLink usb), etc.
Phil w7ox
On 5/24/14, 8:37 AM, Walter Underwood wrote:
Compression should not matter, because that is disabled in DATA A mode.
I'd save the config, EEINIT, and reload. If that doesn't fix it, ask
[email protected]
wunder
K6WRU
http://observer.wunderwood.org/
On May 24, 2014, at 6:48 AM, Don Wilhelm <[email protected]> wrote:
Julie,
Check to be certain Compression is set to zero.
If it was not set to zero, you should also re-adjust the audio level (either
with the computer soundcard level settings or the KX3 Mic Gain).
73,
Don W3FPR
On 5/24/2014 9:28 AM, [email protected] wrote:
Hello to all! Our KX3 that Larry uses for PSK has mysteriously developed an
unstable ALC bar setting.
If we use the mic gain to set it for 4 bars while transmitting, then on the
next transmission, without our having touched any controls, it goes back up to
6 or 7 bars.
Any ideas what could have changed to make this happen?
We must have inadvertently changed something but I don't know what.
THANKS!
Julie KT4JR and Larry K4MWE
___________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
