Compression should not matter, because that is disabled in DATA A mode. I'd save the config, EEINIT, and reload. If that doesn't fix it, ask supp...@elecraft.com
wunder K6WRU http://observer.wunderwood.org/ On May 24, 2014, at 6:48 AM, Don Wilhelm <w3...@embarqmail.com> wrote: > Julie, > > Check to be certain Compression is set to zero. > If it was not set to zero, you should also re-adjust the audio level (either > with the computer soundcard level settings or the KX3 Mic Gain). > > 73, > Don W3FPR > > On 5/24/2014 9:28 AM, jsdroys...@nc.rr.com wrote: >> Hello to all! Our KX3 that Larry uses for PSK has mysteriously developed an >> unstable ALC bar setting. >> If we use the mic gain to set it for 4 bars while transmitting, then on the >> next transmission, without our having touched any controls, it goes back up >> to 6 or 7 bars. >> Any ideas what could have changed to make this happen? >> We must have inadvertently changed something but I don't know what. >> THANKS! >> Julie KT4JR and Larry K4MWE >> ______________________________________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
