Yes RADIO is still set for K3.
Last night I had never even touched the cable that went between the
KPA500 and the KAT500. Unless Murphy got in here while I was sleeping
and broke a wire inside the cable that hadn't been touched...
yea I know stranger things than that have happened b4, hi hi.
On 12/22/2014 10:01 AM, Jack Brindle wrote:
The KPA is still set for RADIO= K3, right? Shortly after power up,
the KPA will send its on state to the K3 using the Auxbus, but only
if it is told the radio is a K3. The symptom is that this is not
being received by the K3. The logical conclusion is that something is
blocking it. Nothing messed up on pin 2 of the AUX cable, right?
I don't remember if the K3 must be told about the KPA (don't think
so, but that would have been long ago...), but if so make sure of
that setting.
I'll research this a bit more when I get back to my info system,
maybe an hour...
73, JackB, W6FB
--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
