I have been using my K3S with Win 7 so far and decided to give the Mac a chance to play.
Downloaded the latest utility for the Mac (Latest OSX, Macbook Pro I7 w/16gigs) and convinced the Mac that I really did want to open this file. I selected the USB com port and my radio immediately went into TX mode and would not stop. I shut down the radio. Stated K3S again and it was still in TX. I unplugged the USB, radio still in transmit. Powered off rdio, power on again, still in TX. Now I connected the rdio to my Win 7 machine, and all is well again. Now, plug USB back into the Mac, re-read paragraph two above. I am a new user to the Mac and don’t know a lot about the comport details so this is probably something silly, but I need some assistance. Help! Part 2) Just to sav e time, I hooked up the K3 to Mac with KUSB cable, and sure enough, it also goes to TX when connected to the Mac. So it;s not the radio, must be a setting in the computer, a hiccup in the utility. FWIW: I have moved the modified KBPF3 and filters from my old K3 to the K3s yesterday and that is working just fine. …bill c nr4c ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
